NRC80 Automatic Paper Corner Guard Making Machine

NRC80 automatic paper corner guard making machine by NRC MACHINE: 25-100mm wide, 2-8mm thick L-profiles at 0-60m/min, servo tracking cutting, 1-2 operators.

SKU: NRC80-20261111-0007 Category: Tag: Brand:

1. Product Overview

NRC80 paper corner guard making machine could turn paper rolls into strong paper corner guards.Paper corner guards (also called paper angle protectors, corner boards, edge boards or L-profiles) are one of the most widely used secondary packaging components. They are placed on the vertical and horizontal edges of stacked cartons, pallets and flat goods so that strapping bands do not crush the packaging, the stack stays rigid, and corner impact damage is reduced. Because they are made from layered kraft paper rather than plastic or expanded foam, they are recyclable with the paper stream and are increasingly specified for export shipments.

automatic paper corner guard making machine line
Automatic paper corner guard making machine line

The NRC80 is the machine that turns rolls of surface paper and core paper into those finished L-profiles in a single continuous pass. The delivery scope is a complete line rather than a single host:

1.1 Included in the supply

  • Main machine body (forming, gluing and cutting host)
  • Glue equipment with automatic cyclic double-sided glue supply
  • Paper roll rack / hoisting paper holder
  • Related auxiliary equipment, transmission conveyor and receiving table
  • One set of inner hexagonal (Allen) wrenches for tooling and adjustment

2. Technical Specifications

2.1 Production performance

ItemSpecification
ModelNRC80 Automatic Paper Corner Guard Making Machine
Production speed0–60 m/min (steplessly adjustable)
Cutting modeServo tracking cutting
Table / cut-off device controlNumerical control
Overall control modeNumerical control
Number of operators1–2 people
Host power (main drive)11 kW
Cutter motorServo motor, 4.3 kW
Total installed power11 kW + 4.3 kW
Main engine speed1,400 r/min
Reducer modelWPA135, ratio 1:10
BearingsHarbin / Wanxiang
Linear guide railSquare (rectangular) guide rail

2.2 Finished paper corner guard dimensions

ParameterRange
Guard width (leg size)25–100 mm
Guard length50–9,000 mm
Guard thickness2–8 mm
Profile shapeL-shaped paper angle protection (V-shaped profiles can be discussed with the manufacturer as a customised option)

2.3 Raw material requirements

Material layerGrammage
Surface paper (outer liner)150–220 gsm
Core paper (inner fluting / medium)300–700 gsm
Usable material typesKraft paper and multi-ply paper liner stock in the grammage ranges above (confirm exact ply count and moisture spec for your target thickness with NRC MACHINE)

Thickness is built up by the number of paper plies: a 2 mm guard and an 8 mm guard are produced from the same line by changing the ply combination and the paper grammage, not by changing the machine.

2.4 Electrical, control and pneumatic components

ComponentBrand / specification
PLCDelta, or brand of your choice (customised)
Operator interfaceDelta, or customised
Frequency converter (inverter)Delta, or customised
Major executing devices (contactors, relays, etc.)Omron / CHINT
Cylinders and pneumatic elementsAirtac / Chengdi
Cutting drive4.3 kW servo motor with tracking control

2.5 Machine dimensions, weight and required floor space

ItemValue
Host size (L × W × H)7,000 × 870 × 1,650 mm
Total floor area to allow (coverage space)33 m × 3 m
Host weight3,024 kg
Total weight (as shipped)5,142 kg
Upper hub diameter250 mm
Lower hub height258 mm
Machine host surfaceStainless steel

Planning note: the 7 m host is only part of the footprint. Because the guard length runs to 9,000 mm, the line needs the full 33 m × 3 m envelope for the roll rack, the conveyor and the receiving end.

3. Standard Configuration Devices

Configuration itemSpecification
Octagonal (forming) device8 groups
Paper holder typeRight-angle fixed hoisting paper holder
Glue supplyAutomatic cyclic double-sided gluing
Guide wheelsStainless steel pipe + steel plate
Top paper deviceAutomatic conveyor belt and receiving table
Transmission deviceAutomatic conveyor belt and receiving table
Table cutting deviceNumerical control
Machine host surfaceStainless steel
Supplied toolsOne set of inner hexagonal wrenches

4. How the NRC80 Line Works

The NRC80 runs the whole corner-guard build in one continuous pass, from parent rolls to cut and stacked product. The sequence below follows the equipment listed in the standard configuration.

  1. Roll loading.Surface paper (150–220 gsm) and core paper (300–700 gsm) are mounted on the paper roll rack. The right-angle fixed hoisting paper holder supports the rolls and keeps the web path square to the line.
  2. Web feeding and alignment.The plies are drawn through the stainless-steel-and-steel-plate guide wheels, which keep the layered web centred and prevent edge damage before forming.
  3. Double-sided gluing.The automatic cyclic glue supply coats both bonding faces as the plies nest together, so the multi-ply build bonds through its full thickness rather than only at the outer faces.
  4. Forming into the L profile.The bonded web passes through the 8-group octagonal forming device, which progressively shapes and compacts it into the finished angle profile at the set width and thickness.
  5. Servo tracking cut-to-length.The 4.3 kW servo cutter accelerates to match the running profile and cuts to the length set on the numerical-control panel — from 50 mm up to 9,000 mm — without stopping the line.
  6. Conveying and collecting.Finished guards are carried off by the automatic conveyor belt and laid onto the receiving table for bundling and packing.

5. Why Buyers Specify the NRC80

  • Servo tracking cutting.The cutter follows the product instead of the product being indexed to the cutter, so long-length guards (up to 9 m) can be cut cleanly at line speed without a stop-and-cut cycle.
  • Eight forming groups.Multi-pass forming distributes the shaping load across eight stations, which is what holds the leg dimensions and the corner line consistent at 2–8 mm thickness.
  • Double-sided cyclic gluing.Bonding both faces of the plies is the difference between a guard that delaminates under strapping tension and one that does not.
  • Wide single-line envelope.25–100 mm width, 50–9,000 mm length and 2–8 mm thickness are covered by one machine, so a corner-guard job shop can serve most pallet and carton edge sizes without a second line.
  • Recognised component brands.Delta control, Omron / CHINT executing devices and Airtac / Chengdi pneumatics are stocked by distributors in most markets, which keeps spare-parts lead times short. Each item can also be specified to a local brand.
  • Stainless-steel contact surfaces.The host surface and the guide wheels are stainless, which resists dried-glue attack and simplifies the clean-down that a glued line needs.
  • Low labour.One to two operators cover roll loading, monitoring and collection across a 0–60 m/min range.

6. Typical Applications

Guards produced on the NRC80 are used as secondary protective packaging wherever stacked, strapped or flat rigid goods need edge support, including:

  • Palletised cartons in export and domestic distribution — top and bottom layers and vertical corner columns
  • White goods, small appliances and furniture, where strapping bands would otherwise dent carton edges
  • Glass, mirrors, stone tiles, panel boards and door blanks carried flat
  • Metal profiles, pipes, extrusions and coils bundled edge-to-edge
  • Printed matter, sheet goods and any load that must be handable and bandable as one unit

Where a plastic or foam corner was previously used, the paper equivalent produced on this line is recyclable in the paper stream and is often specified to remove plastic from the shipment.

7. Operation, Installation and Support

The line is designed for 1–2 operators per shift. Roll changes at the hoisting paper holder and glue-tank refills are the routine tasks; cutting length and line speed are set from the numerical-control interface rather than by changing mechanical parts.

8. Frequently Asked Questions

Q1:What does a paper corner guard making machine produce?

A1:It produces L-shaped protective angles made from layered kraft paper — commonly called paper corner guards, paper angle protectors, corner boards or edge boards. These are placed on the edges of cartons and pallets so strapping does not crush the load and the stack stays rigid.

Q2:What sizes can the NRC80 make?

A2:Guard width 25–100 mm, guard length 50–9,000 mm, and guard thickness 2–8 mm, all from the same line.

Q3:How fast is the NRC80, and what does that mean in output?

A3:The line runs at 0–60 m/min. At the top of that range it delivers up to about 3,600 metres of finished corner guard per hour of continuous running; the real piece count depends on your cut length and on roll-change downtime.

Q4:What paper do I need to run it?

A4:Surface paper of 150–220 gsm and core paper of 300–700 gsm. Finished thickness is built up by the ply combination, so the paper you buy determines the guard thickness you can reach.

Q5:How many operators does the line need?

A5:One to two people cover loading rolls, monitoring the glue and forming section, and collecting cut product.

9. About the Manufacturer

NRC MACHINE is the brand of Qingdao New Richuan Precision Machine Co., Ltd, a Qingdao-based builder of paper protective packaging machinery, including automatic paper corner guard and paper angle protection production lines. This page documents one specific model — the NRC80 — and the figures shown are the manufacturer’s published NRC80 specification.

9.1 Specification status and how to verify it

  • Source of data:all dimension, power, speed, weight and component-brand figures on this page come from the NRC80 specification sheet supplied by the manufacturer.
  • Scope of the claim:this page describes the standard NRC80 configuration. Options, customised brands and any later revision of the machine supersede the table above.
  • Before you rely on a number:request the current NRC80 configuration sheet in writing and check it line by line against Section 2 of this page. Purchase decisions should be made on the signed configuration sheet, not on a marketing page — including this one.

10. Request a Quote

NRC MACHINE — Qingdao New Richuan Precision Machine Co., Ltd

Product: NRC80 Automatic Paper Corner Guard Making Machine

Phone / WhatsApp: +86 152 5421 3289

Email: james@nrcmachine.com

Website: https://nrcpapermachine.com

When you enquire, state your target guard width, thickness and length, the paper grammages available locally, your supply voltage and frequency, and your preferred PLC brand — the NRC80 covers 25–100 mm × 2–8 mm × 50–9,000 mm at 0–60 m/min, and those inputs determine the rest of the configuration.

 

Reviews

There are no reviews yet.

Be the first to review “NRC80 Automatic Paper Corner Guard Making Machine”

Your email address will not be published. Required fields are marked *